Announcement

Collapse
No announcement yet.

Super embarrassing glass work

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Super embarrassing glass work

    We ripped up the floor in our 21' fishing machine, and there was this horribly covered stringer staring back at us. Its so slumped and sad! But the foam is intact, 40 years later.

    anyone else encountered a stringer finished this badly?
    Attached Files

  • #2
    wow that is bad. Don't know what happened to quality control that day.
    1980 Glasply 2400 Cuddy I/O, 2017 Cummins 4BT
    1975 Glasply 19.5' Cuddy Merc 488 190 hp
    1997 Campion 525 Open Bow Ski Merc 125 hp outboard
    14' Inflatable sailboat
    16' Colman Fastback canoe

    Comment


    • #3
      Must have been done on Friday afternoon.
      1981 Hardtop Cuddy Alaskan Bulkhead Rebuild Thread
      1972 HT Cuddy-Rebuild Thread
      8' 650cc Kawasaki powered dinghy

      Comment


      • #4
        I wonder if that isn’t just the CSM layup they placed on the underside of the plywood they then set down over the stringers to form the sole/deck. They could have set the plywood down immediately after it was laid on (that Friday afternoon) and it sloughed off once it was set in place. If that’s the case, then it wouldn’t be material from the stringer construction.
        -- Tim Taylor

        1979 Glasply 21-foot I/O Overnighter w/ 5.0L Volvo-Penta duoprop (Cardinal)
        1982 Glasply 16-foot runabout w/ 50hp Mercury OB (JV Junior)
        1978 Glasply 19-1/2 foot runabout, project boat (Beer Goggles)


        I wrote a song about a tortilla. Well actually, it’s more of a wrap.

        Comment


        • #5
          Oooh! Binford! We hadn't considered that! We looked at it for a good 15 minutes just like.... huh. Hahaa.

          the foam is exposed on the top of the stringer in about a 3 ft section, but that could have been pulled up with the plywood when we removed. Good thinking. I like this answer better than looking at that stringer and thinking it was good enough

          Comment


          • #6
            Makes me wonder what’s going on under my floor.

            Comment

            Working...
            X