Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28

Thread: Fall Refit for loose change

  1. #21
    many thanks to Bill, he let me raid his spare electrical switches and circuit breakers, thanks again Bill
    1980 2400 Cuddy I/O, 2017 Cummins 4BT coupled to a Volvo DP-SM with F9 Props, and a 2014 Mercury 15HP Pro-Kicker "LOOSE CHANGE"

  2. #22
    well i am progressing through the list pretty well, but the polishing might wait till spring, i have everything done but the overhead for the electronics and cooler storage, that should happen today(cooler storage that is)boat looks like a bomb has went off, it will be nice when it starts going back together. over 200 terminals crimped and heatshrinked, and not much room to fit anymore wires through the hole to the dash
    1980 2400 Cuddy I/O, 2017 Cummins 4BT coupled to a Volvo DP-SM with F9 Props, and a 2014 Mercury 15HP Pro-Kicker "LOOSE CHANGE"

  3. #23
    well i am real close to putting her back into the water,waiting for a couple of nmea cables then i can put the new headliner in. i did not complete a few of the things, (all the polishing) but i can do that in the spring. i really miss running her, so i will be chasing blackmouth soon
    1980 2400 Cuddy I/O, 2017 Cummins 4BT coupled to a Volvo DP-SM with F9 Props, and a 2014 Mercury 15HP Pro-Kicker "LOOSE CHANGE"

  4. #24
    as soon as she goes to the water, i can bring my new glasply home, already hunting for a tdi
    1980 2400 Cuddy I/O, 2017 Cummins 4BT coupled to a Volvo DP-SM with F9 Props, and a 2014 Mercury 15HP Pro-Kicker "LOOSE CHANGE"

  5. #25
    Senior Member
    Join Date
    Feb 2016
    Location
    Camano Is. Wa.
    Posts
    289
    That 17 is in Springfield Or. right. I'm looking at a used truck in Roseburg that is just what I want.

  6. #26
    yes, Kaisers
    1980 2400 Cuddy I/O, 2017 Cummins 4BT coupled to a Volvo DP-SM with F9 Props, and a 2014 Mercury 15HP Pro-Kicker "LOOSE CHANGE"

  7. #27
    Senior Member
    Join Date
    Feb 2016
    Location
    Camano Is. Wa.
    Posts
    289
    Dave, sent you a PM

  8. #28
    finishing up the last couple things, then off to the marina Sunday. got just about everything done. did not get the overhead panel made, polish or change the head. these will get done in the spring. picking up my seats and cuddy cushions today from Corbin, he says they look good
    1980 2400 Cuddy I/O, 2017 Cummins 4BT coupled to a Volvo DP-SM with F9 Props, and a 2014 Mercury 15HP Pro-Kicker "LOOSE CHANGE"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •